Kohan Algo Print 500 Natural Thickener

Alginate printing paste developed for reactive printing


Appearance: Cream-brown powder

pH: 7

Viscosity (1%): 540 mpas

* Kohan Algo Print 500 can be used of its pure form for single-phase reactive printing; also, it is suitable for all printing techniques and all fixation process. This product gives very high color yield and sharp and level prints and it can be added to printing paste directly.


Preparation of the stock paste

2-3 gr Kohan Algo Print 500 for 100 gr printing paste mixture will be enough to obtain reasonable viscosity. After adjusting alkali, urea and oxidizing agent, you can add water while stirring up to 1 lit then mix till 3-4 hours to complete swelling, after that the paste will be ready to use.


Recommended recipe for cotton

Kohan Algo Print 500                         20 gr/kg

Urea                                              100 gr/kg

Sodium bicarbonate                          35 gr/kg

Ludigol KN                                        10 gr/kg

Soda ash                                           5 gr/kg

Time of fixation has been done for 7-12 min in saturated steam 105 C Temp


Process of removal from fabric

First bath: neutralizing with acetic acid and cold water

Second bath: 1 g/l DENRAW NBP 75°C

Third bath: 1 g/l BLUE WASH 60°C

Forth bath: cold water



Kohan Algo Print 500 is supplied in 25 kilo bags

کاتالوگ محصول

Click on the link below to download the file



There are no reviews yet.

Be the first to review “Kohan Algo Print 500 Natural Thickener”

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.